New Lateral Reinstatement Tool Increases Spartan Plumbing’s Efficiency

What is Lateral Reinstatement and How it Helps Plumbers?

Spartan Plumbing provides superior solutions for homeowners who require HVAC services and plumbing repairs. Plumbers use advanced technologies in order to provide the best outcome. This is why the company developed a new tool in order to allow service professionals to repair piping infrastructure without digging trenches and damaging the homeowner’s yard. This tool is the Tornado ™ Reinstatement Cutter and is now available exclusively through Hurricane Reinstatement Solutions and Spartan Plumbing, Heating & Cooling.

Lateral reinstatement is a procedure that allows plumbers to access damaged subterranean pipes without digging trenches. This is beneficial for homeowners who want the repairs done with a minimum amount of disruption to the property. It is important to understand that pipes will wear down over time. Corrosion, rust and other types of damage may accumulate in the pipes. In addition, gaining access to the lateral connective surfaces of the piping is often difficult. Access points might not be readily available, and the pipes are often installed in areas that are hard to reach.

How Lateral Reinstatement Helps Plumbers

Repairing these parts can be tricky when the pipelines are located underneath the ground. Trenchless technologies allow plumbers to conduct essential repairs without defacing the property. When a plumber is performing a cured-in-place pipe technique, or CIPP, the available tools will determine the amount of time it takes to complete the procedure. This usually involves several steps, and it also requires gaining access to the lateral connectors of the pipe.

Best Lateral Reinstatement Tool

The unique Tornado cutting tool from HRS allows the plumber to access lateral connections and correct problems. It also allows the work to be completed in the shortest amount of time possible. For example, most cutters typically have a reinstatement time of 30 to 45 minutes. Any modest improvement in this area will save time and improve efficiency. The Tornado ™ Reinstatement Cutter performs at a rate of 15 to 30 seconds. This is a substantial improvement in the time required to perform the reinstatement.

Spartan Plumbing, Heating & Cooling

Spartan is proud to offer this new technology, which was thoroughly tested in a major installation in Las Vegas. The Tornado ™ Reinstatement Cutter tool was used at one of the largest major Perma Liner installation jobs in the city. The work was done at the Stratosphere Casino, Hotel and Tower in Las Vegas. After this initial success, the cutter was employed more than 80 additional times for lateral pipe reinstatements, and the tool performed flawlessly.

The Tornado ™ Reinstatement Cutter allows plumbers to gain access to the most difficult areas of the pipe and restore the service of the line. Lateral reinstatement is necessary in order to achieve the best results. The Hurricane Reinstatement Solutions cutter is a new innovative tool that allows plumbers to reinstate the lateral connections in record time while maintaining the highest quality of work.

New Lateral Reinstatement Tool Increases Spartan Plumbing’s Efficiency Read more on: Spartan Plumbing Heating and Cooling

was originally seen on

Spartan Plumbing Tucson

6211 E. Speedway Boulevard

Tucson, AZ 85712

(520) 617-1000


Plumbing Tips to Keep Your Plumbing System Running Smoothly

Plumbing problems may pop up from time to time. Often, they happen when you least expect them to. It’s great if you know how to fix these problems on your own. Otherwise, you can always leave the job to the hands of experts such as Spartan Plumbing.Smart Faucent

Following are some plumbing tips that will prepare you to deal with unexpected plumbing issues when they happen.

Fixing Frozen Pipes

If you see frozen pipes, switch on the faucet that is nearest to the pipes. This way, water will flow out once the pipes begin to thaw. Doing this will also help keep the pipes from bursting, which can result in more expensive repairs.

Preventing Septic Tank Backup

To prevent septic tank backups, you should make sure it is pumped at least once every 5 years. Regular pumping will prevent the build-up of sediment that may cause a backup into your home, or worse, septic system failure.

You may be worried that having your septic tank pumped will cost some money. It will. But, keep in mind that it will cost you a lot more money to clean sewage backup, or to replace or fix your septic tank.

Covering the Drains

Cover all drains with a strainer. This way, particles that can potentially cause clogging will not go down the drain. Make sure to clean kitchen sink strainers each time large food particles are collected. For the bathroom, a bathtub strainer will keep hair and soap scum from causing a clog in your drains.

Extending the Life of Your Garbage Disposal

Cleaning your garbage disposal unit on a regular basis will help prolong its productive life. When it starts to give off a foul smell, run some citrus rinds and dish detergent through the cycle. This will help the equipment smell fresher.

Maintaining Bathtub Drains

A good way to maintain your bathtub drains is through the use of a vinegar and baking soda solution. Just pour the solution into the opening of the drain once every month. Then, cover the drain’s top with a towel or washcloth to restrain the chemical reactions.

Wait for a few minutes before flushing out the drain with boiling water. This will help clear the pipes of all the accumulated soap scum and hair.

Water Seeping into the Dishwater

At the first sign of water leaking into your dishwater, inspect your kitchen sink. Determine if the hose is properly installed. The hose must go in a hill-like pattern – something similar to the St. Louis Arch – to keep water from mixing. Beginning from the sink, it should go up and then down before it connects to the dishwasher. Only pressurized water will be able to pass through the hose; thus, leakage will not be a concern.

Showerhead Replacement

When your showerhead needs replacement, make sure to buy a replacement that is of high quality. Don’t give in to the temptation of buying a cheaper alternative. In many cases, these options are cheap for a reason: they are of inferior quality. They tend to break easily.


Final Word

The best time to learn how to deal with possible plumbing issues is before they actually emerge. You shouldn’t wait for the problem to happen before educating yourself on what to do. Also, preventive maintenance can help a lot in keeping plumbing problems at bay.

Keep the tips provided in this post in mind. Use them in your plumbing strategy. This way, you can keep your plumbing system in great shape for a long time. You can then deal with problems as they happen. For problems you cannot handle on your own, let Spartan Plumbing do it for you!

Plumbing Tips to Keep Your Plumbing System Running Smoothly Read more on: Spartan Plumbing of Tucson

The blog post is courtesy of

Spartan Plumbing, Heating and Cooling

6211 E. Speedway Boulevard

Tucson, AZ 85712

(520) 617-1000

Maintenance for Your Commercial HVAC

According to the Energy Information Administration of the US, heating costs contribute around 25% of the total energy expenses in commercial buildings. The estimates may even go higher, depending on the prevailing local rates. As such, it is important to keep your HVAC system working at optimum levels at all times. This will only be possible through regular preventive maintenance.

The winter season also increases risk exposure of your commercial HVAC equipment. But, you can lessen the risk through preventive maintenance measures. These include regular inspections of your equipment that can help avoid the most common types of HVAC system failures during winter.

Most Common Types of HVAC System Problems during the Winter Season

  • Less heat resulting from rooftop unit condenser failure. During the cold months, snow, debris, and other materials may accumulate around the rooftop condenser unit. As a result, your HVAC system may produce poor heat output and less efficient operation within the building.

When there are obstructions, air intake may contribute to potentially poisonous gas build-up (like carbon monoxide) on the premises. This may happen throughout the winter season.

Commercial HVAC system preventive maintenance measures include cleaning your rooftop condenser units and setting up a plan to remove snow, ice, and other debris before and during the freezing months of the winter season.

  • Heat exchanger failure due to dry air from overuse. Dry air poses a big problem during the winter months. It can cause skin and other health problems to the building occupants. As the building owner, this will reflect on your brand.

Dry air also triggers a lower heat exchange efficiency in your HVAC equipment. This is because dry air is not capable of containing as much heat as regular air. As part of your HVAC preventive maintenance plan for the winter season, you can install additional humidifiers or update your existing units.

  • Reduced coil efficiency due to dust, mold, and debris. The accumulation of dust, mold, debris, and other similar materials around the coils of your HVAC system has a negative impact on the equipment’s overall efficiency. To ensure optimal performance from your HVAC equipment, clean the coils on a regular basis. You should also inspect the coils for any sign of coolant leakage.
  • Occurrence of gas problems. Depending on the source of energy your HVAC equipment uses, you should inspect all the incoming gas lines for possible leaks and pressure. As you perform these steps, check the pilot lights to make sure they are working efficiently. Gas pilot lights must stay lit all the time, and electrical pilot lights must be free from dust and other types of debris.
  • Additional problems arising from improper thermostat calibration. It is possible that your heating unit has not been used since winter of last year. Thus, your thermostat may not be calibrated properly. While this may seem like a minor concern, it may unnecessarily trigger the activation of the HVAC equipment. It turn, this may cause both the cooling and heating systems to fire up at the same time. This will not only result in poor heating within the building, but it will also cause a spike in your electricity bills.


Final Word

By having a sound preventive maintenance plan in place, you can reduce the total cost of your building’s HVAC systems. By implementing an early preventive maintenance program for your HVAC equipment, you can prevent potential HVAC system disasters from happening during the winter months, when you need your heating system the most.

Contact Spartan Plumbing now to schedule an appointment or to inquire about our commercial HVAC system maintenance plans. Do not wait for winter. Act now!

The following article Maintenance for Your Commercial HVAC Read more on:

is courtesy of

Spartan Plumbing Tucson

6211 E. Speedway Boulevard

Tucson, AZ 85712

(520) 617-1000

How to Unclog a Toilet

Most homeowners would agree that cleaning the toilet is the most disliked task around the household. Next to that would probably be unclogging a blocked toilet.

Many factors can lead to a clogged toilet. But, whatever the reason, it can be quite irritating when you see a lot of water coming out of the bowl, or when there isn’t any water coming out! What is worse is when you see excess water spilling out of the bowl and onto your bathroom floor.

When faced with the problem of a clogged toilet, the first thing that comes to people’s minds is to reach for a plunger and unclog the toilet on their own. This fix may work in many cases, especially when the clog is only minor, like clogs involving some toilet paper that failed to get into the sewage system. But, there are some instances when the problem is worse than anything a plunger can fix. For these problems, you may need to hire the services of experts like Spartan Plumbing.

Things That Can Lead to Toilet Clogs

As mentioned, different things can cause a toilet clog. These include anything other than human waste and toilet paper, such as the following:

  • Soft toys
  • Rubber or plastic
  • Chunks of food waste
  • Feminine napkins and other hygiene products
  • Diapers

These things belong in garbage bins, and they are not intended for your toilet. Refraining from flushing these things down your toilet can help prevent clogging. In addition, there are other things you should and should not do when trying to avoid a clogged toilet or when you are fixing one.


What You Should Do to Unclog a Toilet

Following are some things to keep in mind when trying to fix your clogged toilet on your own:

  • Only use the proper tools. This means using only tools and equipment intended to unclog toilets, the most common of which is the plunger. For clogs that are located deeper down the waste pipe, you can use other DIY tools like a snake that can help you reach deeper clogs safely.
  • Always maintain your composure. It is easy to lose your cool when things get frustrating. But, you need to keep your temper in check at all times. This is the only way you can think clearly. You may only cause more damage to your toilet when you work on it while you’re angry.


What You Shouldn’t Do When Unclogging a Toilet

Refrain from doing the following when trying to fix a toilet clog. Doing these may only make your problem worse.

  • Using regular household items. Never try to reach the blockage and unclog your toilet using regular household items like clothes hangers. For one, it can result in scratching your bowl. It can also cause stains and some minerals getting to the surface. Worse, it can bring significant damage to your toilet bowl.
  • Continuously flushing in hopes of removing the clog. Doing this will not only waste a lot of water and raise your utility bills, but you can also cause flooding in the bathroom. Instead of fixing what could be a simple clog in the first place, you may only worsen the situation. The best thing to do when this happens is to call Spartan Plumbing and let the experts handle the job for you.
  • Removing the toilet. If there is one thing you do not want to do when fixing a clogged toilet, this is it. After trying everything to no avail, your next step should be to call a professional for help. Removing your toilet will not help.


Final Word

A lot of toilet clogs are simple and easy to deal with. But, you need to follow some basic rules as covered in this post. For plumbing issues that are beyond DIY repairs, call Spartan Plumbing.

How to Unclog a Toilet was first published to call our pros today

was originally seen on

Spartan Plumbing, Heating and Cooling

6211 E. Speedway Boulevard

Tucson, AZ 85712

(520) 617-1000

How to Ensure That Your Air Conditioner Is Operating at Maximum Efficiency

There’s no question about it: it’s a great idea to learn how to ensure your air conditioner is operating at maximum efficiency. A good air conditioning system makes any home comfortable. At their maximum efficiency, you can even save a whole lot on your monthly electric bills.

Though there could be many HVAC professionals at your beck and call, it’s good to put in some effort yourself. There are lots of no-cost things you can do to improve your air conditioning unit’s efficiency, but you might want to leave some of the harder, more technical issues to the pros. In any case, here are some ways YOU can improve your AC system.

Cooling down your home to a nice temperature is not an easy feat, especially during the summer. The most important thing to remember is you should help your AC system do some of the work.

For example, if it gets too hot in the middle of the day, you might want to close some blinds and let down some curtains. Direct heat and sunlight can pass through glass windows, and west-facing rooms get even hotter due to the hot afternoon sun.

Clean your AC’s housing unit so it doesn’t heat up as fast. The housing needs to be free from all kinds of debris. Trim plants and bushes so there’s a wide enough space between them and your AC housing. A more thorough cleaning can be done by professionals, but you should at least do a weekly checkup and light cleaning. This will help you make sure nothing’s getting lodged in the housing.

If you could, avoid using appliances that depend on heat during the afternoon. Your AC unit will have to work harder to cool down a kitchen that is running stoves and ovens in the middle of the day. If you can do the cooking and baking during colder times, like at night or before the break of dawn, your AC unit will have to exert substantially less effort to cool the kitchen down.

The same applies when you’re running your clothes dryer. You can either let them dry on a clothesline outside, or you can put off using your dryer and wait for the night when it’s colder. Needless to say, you might want to avoid using the dryer and the oven at the same time.

Of course, some fixes will include an investment of some sort. Zoning systems help with regulating temperature separately in different zones of your home, so different rooms can have different temperatures, ensuring maximum levels of comfort for those occupying each room.

Using ceiling fans in addition to your air conditioner can help you save on your energy bills, and can take some load off your air conditioning unit. Ceiling fans use less energy than air conditioners, and they help distribute cool air around the room.

Programmable thermostats make good investments too. You can set a programmable thermostat to a higher temperature during times when no one is home. You can set it to automatically lower the house’s temperature when your area is expecting a heat wave.

A quick tip on thermostats: avoid placing lamps and other heat sources near thermostats, as they may incorrectly read the temperature of the room.

Lastly, if you’ve done all you can but you still want to know how to ensure your air conditioner is working at maximum efficiency, give Spartan Plumbing, Heating & Cooling a quick call. Spartan Plumbing is the best professional plumbing and HVAC contractor in the Tucson area. We not only do great plumbing and HVAC work, we also offer financing options, coupons, discounts, and VIP priority services.

How to Ensure That Your Air Conditioner Is Operating at Maximum Efficiency See more on: website for Spartan Plumbing

is available on

Spartan Plumbing

6211 E. Speedway Boulevard

Tucson, AZ 85712

(520) 617-1000

Is Your Toilet Base Leaking?

One of the most annoying things you can experience as a homeowner is a leaking toilet base. The sad part is, determining the source of the leak can be difficult. Pinpointing where the unwanted water is coming from, and fixing it, will often take you a lot more than just a few minutes. In many cases, you will need the help of professionals like Spartan Plumbing.

Toilet Base Leaking

Several factors may cause your toilet to leak from the base. Knowing them can help you prevent them, saving you a lot of money in expensive repairs. Following are some of them:

  • Wax Seal Issues – Your toilet base is most likely water-sealed with the use of a wax ring. If your toilet recently underwent a plumbing job, or if you had work done on the sub-flooring, it may take longer than usual for the drain to work. This means there might be some water sitting around the wax ring. The water will then spill out in the base area if the ring is a bit loose.

You will know this is the problem if you observe some rocking in the toilet, or if you see visible gaps around the toilet seal. If the bowl is not firmly fixed to the base, the wax seal may sustain damages. You can easily replace the wax seal, but to make sure the problem is properly fixed, it is best to let a professional handle the job for you.

  • Toilet Not Fixed Firmly – Your toilet is supposed to be fixed to the floor tightly, secured with a pair of bolts at the toilet bowl’s sides. If the bolts are a bit loose, water may leak. If this is the root of your problem, make sure both bolts are tightened. This way, the bowl will be secured tightly to the floor.
  • Toilet Bowl Cracks – The presence of cracks in your toilet bowl’s fabric often leads to leaking around the base. Thus, when you flush, the water pressure will force water to seep through the crack. This will create a water pool around the toilet base.

If you are sure this is causing the problem, you can fix it by removing the water from the bowl, then sealing the crack using waterproof sealant or glue. Use the type intended for baths and sinks. Make sure to dry everything first before using the toilet. Replacement of the entire unit may be necessary if the leaking problem persists.

  • Other Leak Sources – If any of the tips above didn’t solve your problem, the problem may be caused by something else. One possible cause is a leaking tank, in which case the water leak flows around your toilet’s base. The bolts securing the tank to your toilet bowl may be causing the leak. It is also possible that the gasket under the bowl is the culprit.

If this is the problem, you can easily fix it by removing the bolts and replacing them. You may also fix the problem just by tightening the bolts if you can, without removing them. To achieve the best seal possible, screw from the tank’s inside going down. Use a screwdriver for this.

Final Word

A toilet leaking at the base may be annoying and difficult to troubleshoot. It can eat a lot of your time. But, it will save you a lot of time and money if you pinpoint the cause of the leak and are able to fix it on your own.

However, not all leaks are easy to fix. For such plumbing concerns, call Spartan Plumbing right away to schedule an appointment.

The following blog post Is Your Toilet Base Leaking? was originally seen on

The Right Time to Get a New Main Water Line

You depend on the main water line to supply water inside and outside the home, but because water keeps flowing through it, it tends to get damaged in a number of ways.

This means you risk having your plumbing being rendered useless, your house getting flooded, and your family experiencing other catastrophes. Fortunately, you can avoid any plumbing disaster by knowing the signs that you need to replace your main water line.

All Clogged Up

One of the most common reasons the plumbing goes haywire is the presence of a clog in some part of the main water line. A number of things can cause clogs to form, such as accumulated debris or waste, tree roots, or the fact that a pipeline is aging or collapsed.

It is not unusual to have clogs in your plumbing, but if they appear frequently enough, it would be wise to have the main water line replaced.

Pressure Plummet

Another sign that your main water line needs replacement is a noticeable drop in water pressure. Low water pressure could be one reason your morning showers are frequently giving you a pain in the neck.

Strange Sounds

Some of your home’s pipes may be broken, resulting in whistling sounds from the pipes as well as bubbling noises from your sink or toilet. The sources of these sounds are usually the areas you would expect to spring a leak.

Rusty, Consistently

One of the benefits of having a main water line is that your home is provided with clean, clear, and colorless treated water. Occasionally, you may find rust in your water. This is hardly a cause for alarm, as it is normal for parts of your plumbing system to build up rust.

But if your water consistently appears rust-tinted, which indicates that your line may be corroded and is letting dirt in, it may be a great time to get a new main water line.

Pesky Pests

If you notice more ants, roaches, rats, and other pests coming into your home, it may be a sign that they were allowed easy access through cracks in the main water line. Having frequent rat scares is one of the signs that you need to replace your main water line.

Paddling Puddles

The presence of puddles in the yard can be caused by a dip in the soil (a natural rainwater collector) or a wayward sprinkling system. But if you have already ruled out these things as the cause of your yard’s wet patches, you might be looking at a main water line with a leaking problem.

Creepy Crawlies

The things you flush down your drain are not the only reasons your main water line has clogging issues. The roots of your trees in the yard, in the process of seeking out needed moisture, may have crept into your plumbing system and gotten near the main line, resulting in problematic clogs.

Soon, these roots may expand and cause the pipe to collapse or burst.

Sudden Spike

It helps to monitor the amount of water your home uses on a monthly basis, as this allows you to watch out for sudden spikes in your water bill. If you know you are not using more water than usual, the unexplained bill increase could be due to leaks from your broken main water line.

In case you observe any of the signs you need to replace your main water line, make sure to address the problem at the soonest. This is a job that requires the expertise of a well-trained plumber, so give Spartan Plumbing a quick call to put an end to your plumbing worries.

The Right Time to Get a New Main Water Line is courtesy of call our pros today

was originally published to

Spartan Plumbing, Heating & Cooling Tucson

6211 E. Speedway Boulevard

Tucson, AZ 85712

(520) 617-1000